| Eight Hints for Better Scope Probing - Application Note
In this application note, you will find eight useful hints for selecting the right probe for your application and for making your oscilloscope probing better.
應用說明 2013-10-28
|
 PDF 1.46 MB
語言
- English | 2013-10-28 | PDF 1.46 MB
- 日本語 | 2008-04-22 | PDF 4.59 MB
- Português | 2010-10-31 | PDF 1.27 MB
|
| 1131A, 1132A, 1134A InfiniiMax Probing System Recommended Probe Head Configurations Card
A one-page document showing the best methods for connecting the probe to your signal.
迅速開始指南 2013-05-01
|
PDF 554 KB |
| N5450B InfiniiMax 極端溫度延長電纜
Now, Agilent offers a probing solution that covers the full temperature range from -55 degrees to + 150 degrees Celsius. N5450A InfiniiMax Extreme Temperature Extension Cable
產品資料 2012-05-15
|
PDF 290 KB
語言
- English | 2012-03-01 | PDF 218 KB
- 中文（簡體） | 2012-05-15 | PDF 290 KB
|
| 安捷倫示波器探頭和附件選型指南
為示波器測量挑選一款適合的探頭并不難。這篇應用指南為您提供作出*好選擇決定的建議。衰減:要根據測試信號的幅度和示波器垂直靈敏度范圍，選擇探頭的衰 減比 (1:1、10:1、100:1、1000:1)...
選型指南 2012-05-01
|
PDF 2.22 MB
語言
- English | 2013-08-22 | PDF 1.33 MB
- 中文（簡體） | 2012-05-01 | PDF 2.22 MB
- 日本語 | 2013-10-25 | PDF 2.67 MB
|
| How Offset, Dynamic Range and Compression Affect Measurements - Application Note
This application note will clearly present how signal offset and oscilloscope/probe offset interact with regards to the dynamic range of the probe amps.
應用說明 2011-11-02
|
PDF 1.97 MB |
| Extending the Range of Agilent InfiniiMax Probes
This application note describes how to extend the operating range of Agilent InfiniiMax probes in voltage, temperature, and distance (reach between probe amplifiers and heads
應用說明 2009-06-26
|
PDF 400 KB
語言
- English | 2009-06-26 | PDF 400 KB
- 日本語 | 2009-05-15 | PDF 1.64 MB
|
| 1132A 5 GHz InfiniiMax Differential and Single-ended Probes
The 1132A InfiniiMax Active Probing System allows probing of differential and single-ended signals to a bandwidth of over 5 GHz with excellent common mode rejection.
用戶手冊 2009-05-01
|
PDF 1.98 MB |
| 1130A 1.5 GHz, 1131A 3.5 GHz, 1132A 5 GHz, and 1134A 7 GHz InfiniiMax Active Probes Quick Start
This guide provides user and service information for the 1130A, 1131A, 1132A, and 1134A InfiniiMax Active Probes.
迅速開始指南 2008-10-01
|
PDF 1.13 MB |
| Oscilloscope probing for high-speed signals
The probe is the dominant factor in determining the noise floor and response of your measurement system. Probe loading effects on the circuit under test are also a critical consideration.
應用說明 2008-09-03
|
PDF 628 KB
語言
- English | 2008-09-03 | PDF 628 KB
- 日本語 | 2008-10-10 | PDF 2.17 MB
|
| InfiniiMax II 1168A/1169A Probe Handling Guide
This book will assist you in properly handling your InfiniiMax II 1168A/1169A probe amplifiers and probe heads.
用戶手冊 2008-08-01
|
PDF 555 KB |
| InfiniiMax Probes Impact on Lead-Free (ROHS) Compliance
Some Agilent InfiniiMax oscilloscope probe heads are intended for soldering to the device under test.
應用說明 2008-06-20
|
PDF 221 KB |
| 高帶寬電壓探頭的保真度真相，AN 1404
通過分析高帶寬電壓探頭，揭示了存在于所有高帶寬探頭的保真度與易用性的基本權衡。
應用說明 2008-06-20
|
PDF 1.95 MB
語言
- English | 2008-06-20 | PDF 722 KB
- 中文（簡體） | 2008-06-20 | PDF 1.95 MB
- 日本語 | 2002-07-16 | PDF 883 KB
|
| Infiniium DSO80000B Series Oscilloscopes and InfiniiMax Series Probes
The signal integrity advantages of DSO80000B Series scopes and the InfiniiMax probing system include the industrys lowest noise floor, lowest jitter measurement floor, lowest trigger jitter and flattest frequency response.
技術總覽 2007-07-25
|
PDF 3.28 MB |
| Probe De-skew and Clibration
Contains information on the InfiniiMax probe heads except for the SMA probe head.
校準指南 2004-08-24
|
PDF 973 KB |
| Infiniium 示波器探頭和附件
Infiniium 示波器探頭和附件
產品資料 2003-10-06
|
PDF 2.16 MB
語言
- English | 2012-11-26 | PDF 12.53 MB
- 中文（簡體） | 2003-10-06 | PDF 2.16 MB
- 日本語 | 2004-08-23 | PDF 3.29 MB
- 中文（繁體） | 2002-10-23 | PDF 4.16 MB
- ??? | 2005-12-01 | PDF 1.09 MB
|
| Input Impedance SPICE Models for InfiniiMax 1130 Series 3.5 GHz to 7 GHz Active Probe
Use the free Adobe Acrobat Reader's "Text Select Tool" to copy the actual SPICE model and paste it to your application. This document contains SPICE models that can be used to predict the probe loading effects of the InfiniiMax active probes.
用戶手冊 2003-09-01
|
PDF 395 KB |
| 差分和單端有源探頭性能比較
差分和單端有源探頭性能比較
應用說明 2003-06-05
|
PDF 730 KB
語言
- English | 2003-02-14 | PDF 1.60 MB
- 中文（簡體） | 2003-06-05 | PDF 730 KB
- 日本語 | 2008-09-04 | PDF 897 KB
|
| 提高高帶寬示波器有源探頭的可用性和性能
提高高帶寬示波器有源探頭的可用性和性能
應用說明 2003-06-05
|
PDF 1.20 MB
語言
- English | 2002-11-01 | PDF 912 KB
- 中文（簡體） | 2003-06-05 | PDF 1.20 MB
- 日本語 | 2003-02-10 | PDF 443 KB
- 中文（繁體） | 2002-12-10 | PDF 1.08 MB
- ??? | 2002-11-01 | PDF 806 KB
|
| E2695A SMA Probe Head for InfiniiMax 1130 Series Active Oscilloscope Probes User's Guide
This user's guide describes the E2695A SMA probe head, included parts, recommended accessories, replacement parts, schematic, performance characteristics, performance graphs, and usage notes.
用戶手冊 2003-06-02
|
PDF 678 KB |
| Understanding and Using Offset in InfiniiMax Active Probes (AN 1451)
This application note explains how offset is applied in the Agilent InfiniiMax Active Probes and how to use offset for various applications.
應用說明 2003-03-31
|
PDF 928 KB
語言
- English | 2003-03-31 | PDF 928 KB
- 日本語 | 2008-09-04 | PDF 837 KB
|
